0.15µF 50V DC UVX General Purpose Radial Capacitor
Part Number: 50UVXR15
0.15µF • 50V DC • 85°C • Electrolytic Capacitor
Capacitance
0.15µF
Voltage
50V DC
Tolerance
±±20%
Temp Rating
85°C
Mounting
radial
Dielectric
aluminum
$2.85 each × 1
About the 0.15µF 50V DC UVX General Purpose Radial Capacitor
UVX General Purpose Radial capacitor. 0.15µF, 50V DC. 85°C rated.
Applications for 0.15µF 50V DC Electrolytic Capacitors
Typical design scenarios where the 50UVXR15 (0.15µF / 50V DC) is specified:
IC Bypass & Decoupling
High-frequency noise suppression near microprocessor, FPGA, and ASIC power pins with 0.15µF local decoupling
RF & Signal Conditioning
Impedance matching, coupling, and filtering in communication circuits and sensor interfaces
PCB-Mount Circuits
Through-hole and mixed-technology assemblies in prototype, low-volume, and field-repairable designs
Medical & Commercial
Diagnostic equipment, HVAC controls, and commercial appliance electronics
Need a Replacement for 50UVXR15?
0.15µF · 50V DC · radial
Our engineers can cross-reference this part to find a compatible replacement that meets or exceeds the original specifications — with full CoC and traceability documentation.
Technical Specifications
Complete specifications for 50UVXR15
Why Choose This Electrolytic Capacitor?
- Part of the UVX series — cross-reference available for equivalent parts from other manufacturers
- 100% electrically tested before shipment for guaranteed in-spec performance
- Ships same-day from US warehouse when ordered before 3 PM EST
Need Technical Assistance?
Our capacitor specialists can help with selection, cross-reference, and application questions.
Why Buy From Specap?
- Family-owned capacitor specialist since 1984
- Experts in hard-to-find & obsolete parts
- Same-day shipping on in-stock items
- 100% electrically tested before shipment
- Volume discounts with no minimum order
- Cross-reference assistance available
Looking for an Equivalent?
We can help cross-reference 50UVXR15 with alternative part numbers.
Cross-Reference ToolCapacitor Calculators
Free tools to help with your design
Frequently Asked Questions
Common questions about 50UVXR15 and electrolytic capacitors
What applications use a 0.15µF 50V DC electrolytic capacitor?
A 0.15µF 50V DC capacitor is typically used for high-frequency bypass near digital ICs, coupling in signal chains, and EMI suppression. Place as close as possible to the power pins of the IC being decoupled for effective noise filtering.
Can the 50UVXR15 handle high-temperature environments?
The 50UVXR15 is rated for 85°C, which covers standard commercial and light-industrial environments. For installations in enclosed cabinets or hot climates where ambient temperatures exceed 65°C, consider selecting a 105°C-rated alternative for additional thermal margin.
What is the recommended PCB footprint for the 50UVXR15?
The 50UVXR15 uses radial mounting. Refer to the manufacturer datasheet for the recommended land pattern. For through-hole parts, ensure the drill diameter is 0.2–0.3mm larger than the lead diameter for reliable hand or wave soldering.
What capacitors can replace the 50UVXR15?
Cross-referencing the 50UVXR15 requires matching capacitance (0.15µF), voltage (50V DC), temperature rating (85°C), and physical dimensions. ESR and ripple current ratings must also meet or exceed the original spec for reliable operation. Contact our technical team at 800-731-1433 for verified cross-reference options — we maintain compatibility data across major manufacturers.
Should I derate the voltage when using the 50UVXR15?
Yes. Industry best practice is to operate capacitors at 60–80% of their rated voltage. For the 50UVXR15 rated at 50V DC, this means designing your circuit to keep the applied voltage below 40V under all conditions including transients. Voltage derating significantly extends capacitor life — each 10% reduction in applied voltage can roughly double the expected service life for electrolytic types.
What is the lead time for the 50UVXR15?
In-stock items ship same-day when ordered before 3 PM EST, with standard delivery of 2–5 business days within the continental US. If the 50UVXR15 shows as out of stock, our sourcing team can typically locate electrolytic capacitors within 1–2 weeks through our manufacturer and distributor network. Contact us for expedited options or large-quantity pricing.
Can't Find the Capacitor You Need?
We specialize in hard-to-find, obsolete, and specialty capacitors. Our experts can help locate any part.