0.1µF 25V DC Axial Tantalum Capacitor
Part Number: 25ATAR1
0.1µF • 25V DC • 85°C • Tantalum Capacitor
Capacitance
0.1µF
Voltage
25V DC
Tolerance
±±20%
Temp Rating
85°C
Mounting
axial
Dielectric
tantalum
$7.95 each × 1
About the 0.1µF 25V DC Axial Tantalum Capacitor
Axial Tantalum capacitor. 0.1µF, 25V DC. 85°C rated.
Applications for 0.1µF 25V DC Tantalum Capacitors
Typical design scenarios where the 25ATAR1 (0.1µF / 25V DC) is specified:
IC Bypass & Decoupling
High-frequency noise suppression near microprocessor, FPGA, and ASIC power pins with 0.1µF local decoupling
RF & Signal Conditioning
Impedance matching, coupling, and filtering in communication circuits and sensor interfaces
Audio & Legacy Equipment
Amplifier coupling, crossover networks, and drop-in replacements for vintage and legacy circuit boards
Medical & Commercial
Diagnostic equipment, HVAC controls, and commercial appliance electronics
Need a Replacement for 25ATAR1?
0.1µF · 25V DC · axial
Our engineers can cross-reference this part to find a compatible replacement that meets or exceeds the original specifications — with full CoC and traceability documentation.
Technical Specifications
Complete specifications for 25ATAR1
Why Choose This Tantalum Capacitor?
- Part of the ATA series — cross-reference available for equivalent parts from other manufacturers
- 100% electrically tested before shipment for guaranteed in-spec performance
- Ships same-day from US warehouse when ordered before 3 PM EST
Need Technical Assistance?
Our capacitor specialists can help with selection, cross-reference, and application questions.
Why Buy From Specap?
- Family-owned capacitor specialist since 1984
- Experts in hard-to-find & obsolete parts
- Same-day shipping on in-stock items
- 100% electrically tested before shipment
- Volume discounts with no minimum order
- Cross-reference assistance available
Looking for an Equivalent?
We can help cross-reference 25ATAR1 with alternative part numbers.
Cross-Reference ToolCapacitor Calculators
Free tools to help with your design
Frequently Asked Questions
Common questions about 25ATAR1 and tantalum capacitors
What applications use a 0.1µF 25V DC tantalum capacitor?
A 0.1µF 25V DC capacitor is typically used for high-frequency bypass near digital ICs, coupling in signal chains, and EMI suppression. Place as close as possible to the power pins of the IC being decoupled for effective noise filtering.
Can the 25ATAR1 handle high-temperature environments?
The 25ATAR1 is rated for 85°C, which covers standard commercial and light-industrial environments. For installations in enclosed cabinets or hot climates where ambient temperatures exceed 65°C, consider selecting a 105°C-rated alternative for additional thermal margin.
What is the recommended PCB footprint for the 25ATAR1?
The 25ATAR1 uses axial mounting. Refer to the manufacturer datasheet for the recommended land pattern. For through-hole parts, ensure the drill diameter is 0.2–0.3mm larger than the lead diameter for reliable hand or wave soldering.
What capacitors can replace the 25ATAR1?
Cross-referencing the 25ATAR1 requires matching capacitance (0.1µF), voltage (25V DC), temperature rating (85°C), and physical dimensions. ESR and ripple current ratings must also meet or exceed the original spec for reliable operation. Contact our technical team at 800-731-1433 for verified cross-reference options — we maintain compatibility data across major manufacturers.
Should I derate the voltage when using the 25ATAR1?
Yes. Industry best practice is to operate capacitors at 60–80% of their rated voltage. For the 25ATAR1 rated at 25V DC, this means designing your circuit to keep the applied voltage below 20V under all conditions including transients. Voltage derating significantly extends capacitor life — each 10% reduction in applied voltage can roughly double the expected service life for electrolytic types.
What is the lead time for the 25ATAR1?
In-stock items ship same-day when ordered before 3 PM EST, with standard delivery of 2–5 business days within the continental US. If the 25ATAR1 shows as out of stock, our sourcing team can typically locate tantalum capacitors within 1–2 weeks through our manufacturer and distributor network. Contact us for expedited options or large-quantity pricing.
Can't Find the Capacitor You Need?
We specialize in hard-to-find, obsolete, and specialty capacitors. Our experts can help locate any part.