88-106µF 250V AC Motor Start Capacitor
Part Number: MS250V88-106
88-106µF • 250V AC • 85°C • Motor Capacitor
Capacitance
88-106µF
Voltage
250V AC
Tolerance
±±20%
Temp Rating
85°C
Mounting
screw
Dielectric
electrolytic
$22.75 each × 1
About the 88-106µF 250V AC Motor Start Capacitor
Motor Start capacitor for HVAC, compressors, and motors. 88-106µF, 250V AC.
Applications for 88-106µF 250V AC Motor Capacitors
Typical design scenarios where the MS250V88-106 (88-106µF / 250V AC) is specified:
Power Conversion
Snubber circuits, voltage multipliers, and power factor correction stages at 250V AC operating voltage
Industrial Controls
Relay suppression, arc quenching, and EMI filtering in industrial switchgear and control panels
Power Capacitor Banks
High-current bus bars in industrial inverters, regenerative drives, and capacitor bank assemblies
HVAC & Motor Systems
Single-phase motor start/run, compressor circuits, and fan motors in commercial HVAC equipment
Need a Replacement for MS250V88-106?
88-106µF · 250V AC · screw
Our engineers can cross-reference this part to find a compatible replacement that meets or exceeds the original specifications — with full CoC and traceability documentation.
Technical Specifications
Complete specifications for MS250V88-106
Why Choose This Motor Capacitor?
- 250V AC voltage rating with recommended 20% derating for maximum service life in power circuits
- Part of the MS series — cross-reference available for equivalent parts from other manufacturers
- 100% electrically tested before shipment for guaranteed in-spec performance
- Ships same-day from US warehouse when ordered before 3 PM EST
Need Technical Assistance?
Our capacitor specialists can help with selection, cross-reference, and application questions.
Why Buy From Specap?
- Family-owned capacitor specialist since 1984
- Experts in hard-to-find & obsolete parts
- Same-day shipping on in-stock items
- 100% electrically tested before shipment
- Volume discounts with no minimum order
- Cross-reference assistance available
Looking for an Equivalent?
We can help cross-reference MS250V88-106 with alternative part numbers.
Cross-Reference ToolCapacitor Calculators
Free tools to help with your design
Frequently Asked Questions
Common questions about MS250V88-106 and motor capacitors
What applications use a 88-106µF 250V AC motor capacitor?
This 88-106µF 250V AC motor capacitor serves filtering, timing, and energy storage functions in circuits operating within its voltage and temperature ratings.
Can the MS250V88-106 handle high-temperature environments?
The MS250V88-106 is rated for 85°C, which covers standard commercial and light-industrial environments. For installations in enclosed cabinets or hot climates where ambient temperatures exceed 65°C, consider selecting a 105°C-rated alternative for additional thermal margin.
What torque specification should I use for the MS250V88-106 screw terminals?
Use the torque value specified in the manufacturer datasheet — typically 1.5–2.5 N·m for M5 terminals and 0.8–1.2 N·m for M4 terminals. Over-torquing can crack the terminal seal and allow electrolyte leakage. Use star washers for vibration resistance and re-torque connections after 24 hours of initial thermal cycling in the target application.
What capacitors can replace the MS250V88-106?
Cross-referencing the MS250V88-106 requires matching capacitance (88-106µF), voltage (250V AC), temperature rating (85°C), and physical dimensions. ESR and ripple current ratings must also meet or exceed the original spec for reliable operation. Contact our technical team at 800-731-1433 for verified cross-reference options — we maintain compatibility data across major manufacturers.
Should I derate the voltage when using the MS250V88-106?
Yes. Industry best practice is to operate capacitors at 60–80% of their rated voltage. For the MS250V88-106 rated at 250V AC, this means designing your circuit to keep the applied voltage below 200V under all conditions including transients. Voltage derating significantly extends capacitor life — each 10% reduction in applied voltage can roughly double the expected service life for electrolytic types.
What is the lead time for the MS250V88-106?
In-stock items ship same-day when ordered before 3 PM EST, with standard delivery of 2–5 business days within the continental US. If the MS250V88-106 shows as out of stock, our sourcing team can typically locate high-voltage motor capacitors within 1–2 weeks through our manufacturer and distributor network. Contact us for expedited options or large-quantity pricing.
Can't Find the Capacitor You Need?
We specialize in hard-to-find, obsolete, and specialty capacitors. Our experts can help locate any part.